Biomass energy is now favored by the energy industry. At present, due to the continuous depletion of coal resources and the country's high requirements for environmental protection and sustainable development, the use of coal-fired power generation has been gradually stopped in order to protect the green mountains and clear waters. Therefore, the production of molded biomass fuels (pellets, briquettes, wood chips, etc.) has become a thriving high-quality industry. However, during the production process, the production must be strictly carried out in accordance with the operating procedures, otherwise it is inevitable that there will be faults or even accidents, causing unnecessary losses.

Oil pump motor-grease pump motor-dial motor-dust collector induced draft fan-pellet machine main motor-feeding motor (slowly adjust the feeder feeding frequency conversion speed, the electric control cabinet ammeter is stable at about 95% of the rated current during operation)

Feeding motor-main motor-dial motor-oil pump motor-grease pump motor-dust collector induced draft fan
Pellet machine main reducer (replace 220# gear oil every 600 hours for the first time, and replace it every 4000 hours after the first replacement).
Dial reducer (replace gear oil once a year, gear oil type 100 or above).
Pellet machine coupling (add high-temperature butter once a week).

(1) The bag dust collector is processed once per shift (knocked once every 2 hours with a wooden stick).
(2) At the end of each shift, the main machine pelletizing chamber is shut down after the material is used up, and the dust on the main machine is cleaned up with an air gun, and the shift is changed (cleaned up once per shift).
(3) Before shutting down, remember to use oil to grind the mold holes to prevent the material in the mold from blocking the mold, causing the mold to not discharge material, and then causing the machine to become blocked.
(4) Collect the oil and reuse it.
(5) Clean the dust cover of the main machine to remove dust leakage and dust blocking the bag dust collector (clean up once a week).
(6) Electric control cabinet (clean up once a week, and clean the internal dust with an air gun).

Priljubljena oznake: